www.elektron-bulgin.com 142 iec connectors iec connectors ps25/a0420/28= ps25 series, flange fitting, standard filtered iec power inlet, twin fused, rated at 4 amperes. l/c circuit version 2, i.e l1 = 2 x 0.7mh, cx = 1 x 15nf, cy = 2 x 2.2nf without bleed resistor fitted, with 2.8mm tabs. ps25/a ps26/a 2 or 4 amp current rating twin fused optional additional components 2.8 or 6.3mm tabs 2 or 4 amp current rating twin fused optional additional components 2.8 or 6.3mm tabs 1, 1.5, 2 or 3mm panels specification ps25/axx2x/xx00 ps26/axx2x/xxxx part no. example max. working voltage: 250v a.c. 50-400hz 250v a.c. 50-400hz max. power dissipation: 2.5w per fuse 2.5w per fuse earth leakage current: <0.35ma (250v, 50hz) <0.35ma (250v, 50hz) temperature range: C25oc to +85oc C25oc to +85oc max. ambient temp.: 40oc (derate linearly to 0a @ 85oc) 40oc (derate linearly to 0a @ 85oc) (@ full load) test voltage: 2700v d.c. 2 secs. lines to earth 2700v d.c. 2 secs. lines to earth 1100v d.c. 2 secs. live to neutral 1100v d.c. 2 secs. live to neutral approvals: mating connectors: px0587, px0587/se, px0588 px0587, px0587/se, px0588 accessories: p.no. 14340 (see page 96) p.no. 14340 (see page 96) compliant compliant ps25 or ps26/axx 2x / xx xx additional tag type and panel series rating l/c circuit components configuration thickness ps25/a 02 = 2a 2 = version 2 0 = none 28 = 2.8mm blank = flange ps26/a 04 = 4a 1 = bleed (r) resistor 63 = 6.3mm tabs 10 = 1.0mm 15 = 1.5mm 20 = 2.0mm 30 = 3.0mm iec power inlets flange and snap fit (twin fused) mains filters panel mounting snap fit rohs filterssection - 2010:filterssection - 2010 8/6/10 16:57 page 142
www.elektron-bulgin.com 143 iec connectors iec connectors ps25/a022x/xx ps26/a022x/xx rating & version table ps25/axx2x/xx00 & ps26/axx2x/xxxx ps25/a042x/xx ps26/a042x/xx version 2 rating version l1 cx cy 2 amp 1 2 2 x 1.8mh 1 x 15nf 2 x 2.2nf 3 4 amp 1 2 2 x 0.7mh 1 x 15nf 2 x 2.2nf 3 mains filters filterssection - 2010:filterssection - 2010 8/6/10 16:57 page 143
|